Small diameter tube bending manual#
Small diameter tube bending full#

However, the enormous weight makes the use of a crane necessary for transport. Despite the powerful output, the servo drive ensures high energy savings and low oil consumption. With a pressure capacity of 65 tons, a minimum front roller distance of 630 mm and a roller height of 500 mm, this tube bending machine is aimed at aluminium, steel or other materials in larger sizes, such as beam elements. The HELIX Servo represents the second and also even more complex variant with holistic servo drive. Pipe bending machine HELIX Servo, 5500 kg weight: Due to the weight, a forklift or crane is required for transport.

In addition, the distance between the front rollers starts at 360 mm, so that the bending radius is only slightly larger compared to purely hydraulic machines - which in turn also applies to the height of the rollers at 400 mm. The servo drive achieves a pressure output of 35 tonnes with 70% energy savings and only 9 litres of oil volume. The innovation and performance inherent in it is still exemplary today. PBT35 Servo Wide tube bending machine, 2250 kg weight:Р”Р„s the very first model with servo drive on all three rollers, the PBT35 Servo Wide was an absolute novelty with its development. For all its strength and flexibility, the PBT25 can still be moved using a lift truck thanks to its 1150 kg weight. As standard, the height of the rollers is 300 mm, the roller diameter 105 mm and the minimum distance between the front rollers only 200 mm.

Thanks to its modular design, it can nevertheless be adapted to bend both small profiles and larger workpieces.

Small diameter tube bending full#

The PBT25 is the strongest of all purely hydraulic tube bending machines, with a full 27 tonnes of pressure capacity. Pipe bending machine PBT25, 1150 kg weight: The weight also allows the machine to be transported on a pallet truck. The minimum distance between the front rollers, however, is 280 mm, so that a small radius can be achieved when bending without kinks or unclean transitions occurring. The shaft diameter of the rollers is 65 mm in diameter. With 20 tonnes, it has almost twice the pressure capacity and, with 200 mm as standard, almost twice the height of the rollers, which means that correspondingly larger profile diameters are possible. Tube bending machine BENDO, 1050 kg weight:Р”В¬ompared to the ARKUS12, the BENDO goes a step further in many respects. Thanks to its relatively light weight, the steel and aluminium tube bending machine can be transported with a lift truck and can thus be repositioned quickly and flexibly. The distance between the front rollers can be infinitely adjusted between 256 (optionally 80) and 518 mm, which, with an additional bending attachment, enables the smallest radii of up to R35 mm. With a pressure capacity of 12 tons, 110 mm high rollers (optionally also 220 mm) and a roller diameter of 45 mm, it is suitable for bending profiles as aluminium, steel and other materials in smaller sizes. The ARKUS12 tube bending machine represents the most compact of all PBT AG variants. ARKUS12 tube bending machine, 540 kg weight: Depending on the requirements and the available budget, results with the highest precision and the smallest radii can be achieved:

Small diameter tube bending manual#

Using high-quality technology, the product range allows both manual and software-based digital control of the bending process. This includes, for example, a smaller steel and aluminium tube bending machine and leads up to a complex system for the largest profiles such as beam constructions. PBT AG offers different variants of machines. After all, for complex aluminium or steel tube bending solutions, an appropriately designed aluminium tube bending machine is worthwhile, whereas manual bending machines can quickly turn a profile into a reject. Above all, the smallest deviations in the automated bending process of multiple workpieces is a major advantage over manual tube bending tools. While in many cases manual tube bending tools can be used for single radii and simple bending solutions, only high-quality bending machines for multiple radii in one piece can achieve real precision in deformation. These arguments count not least for the work with small workpieces, whether aluminium, copper or steel tubes. This applies both to the tube bending machines themselves and the associated control systems. Accordingly, interested parties and customers benefit from the competence and experience of all employees. Profile Bending Technology AG has now been active in the industry for over 25 years. The arguments for an aluminium tube bending machine